Otter Creek Labs Lithium

Constructed out of 6AI-4V Grade 5 Titanium and CNC welded the Lithium was designed from the ground up to offer the best weight to suppression ratio of any 9mm SMG/PCC suppressor on the market. It uses internal features and venting to help reduce port pop on direct blowback operating systems and features industry standard 1.375x24 (also known as HUB/ASR Bravo) rear mounting threads to easily be adapted to the mounting system of your choice. The Lithium 9 is compatible with 3 lug and booster/piston mounts and can be used on 9mm handguns.

SPECS

Length : 6" (no mount)

Weight : 5.7oz (no mount)

OD: 1.5"

BARREL LENGTH/FIRING SCHEDULE

9MM: Full auto rated, no barrel length restrictions.

300 Blackout Subsonic: Full auto rated, no barrel length restrictions.

300 Blackout Supersonic: Semi auto, 7in barrel and longer.

357 Magnum Lever Action Rifles: YEs, 4in barrel length restriction.

350 Legend, 300 HMR: Semi auto, 16in barrel and longer.

223/5.56: Semi auto with intent to keep temperature down/low volume use, barrel must be 16in or longer.

308WIN/6.5Creedmoor: Bolt action hunting applications only/low volume use,20in barrel or longer.

Because the Lithium has a smaller blast chamber than most typical rifle suppressors a direct thread mount must be used if it’s being fired on 350 legend, 300 HAMR, 223/5.56, 308 and 6.5 Creedmoor and other similar cartridges so that you have maximum blast chamber volume not being occupied by a muzzle device.

What’s in the box? 

Suppressor 

1/2x28 Titanium direct thread mount (ZR0) 

Tube clamp 

Socket tool 

Stickers